Area of Usage
Park – Garden retaining wall, road sides, central refuge division, surroundings of children playground, picnic areas, dividing coastlines
Fences produced as 25 cm bodies with injection method using high density, polyethylene (PE) with addition of flame retarding and colourfastness chemicals. These fences are passed through steel stud channels to achieve 1 meter or desired spacing. Thickness 22.4mm, height 994.3 mm and width 1000 mm. Weight 5000 gr. Due to natural properties of the plastic it is robust to corrosion, discolouring, impacts and cold and hot weathers. Since the aluminium profiled are painted with static paint, they do not require a repaint for a long time. The lug where the plastic fence is mounted is manufactured from aluminium cast, therefore it won’t be rusted.
1-MODULE 3A: Plastic head module. Fences produced as 25 cm bodies with injection method using high density, polyethylene (PE) with addition of flame retarding and colourfastness chemicals. These fences are passed through steel stud channels to achieve 1 meter or desired spacing. Thickness 16.1mm, width 250mm, height 304mm and weight 500 gr.
2- MODULE 8-9: Steel Mounting Stud Bodies are used when the bodies are brought together, brings robustness to middle closing. Produced from M 12 worm gear steel, galvanized, height 1040 mm and weight 710gr.
3- MODULE 4: Plastic Head Cap, plastic modules are inserted between stud nuts and module. It prevents the stretching of plastic module and presents an aesthetic look. 20mm*10mm elliptic shape, hole in the middle for M12 screw and weight 3 gr.
4- MODULE 3 – Plastic middle cap is used for combining plastic modules, prevents stretching of steel studs and bring robustness. 20mm*15mm elliptic shape, hole in the middle for M12 screw and weight 5 gr.
5- MODULE 10 – Plastic stud nut is mounted to each end of steel studs enabling mounting the assembled fence to be mounted on fixing profile. Diameter 24 mm, width 24mm and has a hole for M12 screw.
6- MODULE 6 – Fixing profile is manufactured from aluminium and painted with static powder paint in the oven. Diameter 49.8mm, length 350 mm and weight 252 gr/mt.
7- MODULE 5 – Zamak cast base is manufactured from zamak and painted with static powder paint in oven. Base width 80*80 mm, height 55 mm and weight 460gr, 4 outer nut hole and 4 inner nut hole.
8- MODULE 11 Fixing Cap is manufactured from high density, polyethylene (PE) raw material with addition of flame retarding and colourfastness chemicals. Cap closes the top parts of the fixing and prevents the channel caps from falling. Diameter 62mm, height 60mm and weight 25gr. Diameter 54 mm, height 50 mm and weight 14 gr.
9- MODULE 7 – Fixing channel cap helps to aesthetically close the unused channels on fixings. Width 23.3mm, length 7.7mm and height 330 mm. Weight 42 gr/m.
10-MODULE13 – Super plastic imported dowel is manufactured from M8*65 plastic. It is used for mounting the cast base to the surface.
11- MODULE 12 – 5*8 steel screw. M8*75 head, steel manufactured galvanızed screw. It is used for mounting the cast base to the surface. 12- MODULE 14 – Countersunk steel screw; YSB type screw. It is used for mounting plastic fixing head to aluminium fixing profile.