Gülara

gulara1gulara2

Area of Usage

Park – Garden retaining wall, road sides, central refuge division, surroundings of children playground, picnic areas, dividing coastlines

Product Properties

25 cm plastic modules, steel studs are interested into channels in the modules and connected and mounting is completed with plastic nuts in fixing profile channels. Using the channels located in four corners of fixing, fence could have 360 degrees of direction. The implementation enables the fence to be turned in four directions. Plastic fences are attached using galvanized aluminium fixing profile, steel, and smart nuts. Aluminium fixings are mounting to hard surface using aluminium cast bases. 10 cm galvanized steel dowels are used when the aluminium cast base is mounted on the surface. Triphone steel dowel bolts used in mounting the aluminium cast base to the hard surface are covered with plastic covers.

Technical Details

1- Plastic head module. Fences produced as 25 cm bodies with injection method using high density, polyethylene (PE) with addition of flame retarding and colourfastness chemicals. These fences are passed through steel stud channels to achieve 1 meter or desired spacing. Thickness 400 mm, width 250 mm, height 340 mm and weight 590 gr.
2- Steel Mounting Stud Bodies are used when the bodies are brought together, brings robustness to middle closing. Produced from M 12 worm gear steel, galvanized, height 1040 mm and weight 710gr.
3- Plastic Head Cap, plastic modules are inserted between stud nuts and module. It prevents the stretching of plastic module and presents an aesthetic look. 20mm*10mm elliptic shape, hole in the middle for M12 screw and weight 3 gr. 4- Plastic middle cap is used for combining plastic modules, prevents stretching of steel studs, and bring robustness. 20mm*15mm elliptic shape, hole in the middle for M12 screw and weight 5 gr.
5- Plastic stud nut is mounted to each end of steel studs enabling mounting the assembled fence to be mounted on fixing profile. Diameter 24 mm, width 24mm and has a hole for M12 screw.
6- Fixing profile is manufactured from aluminium and painted with static powder paint in the oven. Diameter 49.8mm, length 400 mm and weight 270 gr/mt.
7- Zamak cast base is manufactured from zamak and painted with static powder paint in oven. Base width 80*80 mm, height 55 mm and weight 460 gr, 4 outer nut hole and 4 inner nut hole.
8- Fixing Cap is manufactured from high density, polyethylene (PE) raw material with addition of flame retarding and colourfastness chemicals. Cap closes the top parts of the fixing and prevents the channel caps from falling. Diameter 62mm, height 60mm and weight 25gr. Diameter 54 mm, height 50 mm and weight 14 gr.
9- Fixing channel cap helps to aesthetically close the unused channels on fixings. Width 23.3mm, length 7.7mm and height 330 mm. Weight 42 gr/m.
10- Super plastic imported dowel is manufactured from M8*65 plastic. It is used for mounting the cast base to the surface.
11- 5*8 steel screw. M8*75 head, steel manufactured galvanızed screw. It is used for mounting the cast base to the surface. 12- Countersunk steel screw; YSB type screw. It is used for mounting plastic fixing head to aluminium fixing profile.