Gülistan

 

 

gulistan3gulistan2

Area of Usage

Park – Garden retaining wall, road sides, central refuge division, surroundings of children playground, picnic areas, dividing coastlines

Product Properties

25 cm plastic modules, steel studs are interested into channels in the modules and connected and mounting is completed with plastic nuts in fixing profile channels. Using the channels located in four corners of fixing, fence could have 360 degrees of direction. The implementation enables the fence to be turned in four directions. Plastic fences are attached using galvanized aluminium fixing profile, steel, and smart nuts. Aluminium fixings are mounting to hard surface using aluminium cast bases. 10 cm galvanized steel dowels are used when the aluminium cast base is mounted on the surface. Triphone steel dowel bolts used in mounting the aluminium cast base to the hard surface are covered with plastic covers.

Technical Details

1 – Plastic head module. Fences produced as 25 cm bodies with injection method using high density, polyethylene (PE) with addition of flame retarding and colourfastness chemicals. These fences are passed through steel stud channels to achieve 1 meter or desired spacing. Thickness 22.4 mm, height 1050.3 mm and width 1000 mm. Weight 5400 gr.
2- Fixing profile is manufactured from aluminium and painted with static powder paint in the oven. It is mounted to fixing base and concreate surface and the fence and pergola roof parts are mounted. Diameter 68.4mm, length 1050.9 mm and weight 1490 gr/mt.
3- Fixing Cap is manufactured from high density, polyethylene (PE) raw material with addition of flame retarding and colourfastness chemicals. Cap closes the top parts of the fixing and prevents the channel caps from falling. Diameter 62mm, height 60mm and weight 25gr. Provides an aesthetic look. Diameter 62mm, height 60mm and weight 25 gr.
4- Steel mounting stud helps to assemble 25 cm bodies in certain spacing and adds robustness to the middle cap. Diameter M 12, length 1040 mm and worm gear. Galvanized, produced form steel, and has 710 gr weight.
5- Aluminium cast base is manufactured from aluminium and painted with static powder paint in oven. Since it has holes on it, the fence is fixed to the ground with appropriate spacing. Base width 103.6*103.6 mm, height 55 mm and weight 335gr, 4 outer nut hole and 4 inner nut hole.
6- Plastic stud nut is mounted to each side of steel studs and enables the mounting of assembled fence fixing profile. Diameter 24mm, width 44 mm and has M12 screw holes in the middle.
7- Plastic Head Cap, plastic modules are inserted between stud nuts and module. It prevents the stretching of plastic module and presents an aesthetic look. 20mm*10mm elliptic shape, hole in the middle for M12 screw and weight 3 gr.
4- Plastic middle cap is used for combining plastic modules, prevents stretching of steel studs, and bring robustness. 20mm*15mm elliptic shape, hole in the middle for M12 screw and weight 5 gr.
9- 5*8 headed galvanized steel screw is used for mounting cast base to the surface.
10- Dowel is used for mounting the cast base to the surface.
11- Nut which is YSB type nut is used for mounting plastic fixing head to aluminium fixing profile. 12- Fixing profile is manufactured from aluminium and painted with static powder paint in the oven. It is used for aesthetically covering the unused channels on the fixing. Width 23.3 mm, length 7.7mm and height 970 mm. Weight 124 gr/m.