Area of Usage
Park – Garden retaining wall, road sides, central refuge division, surroundings of children playground, picnic areas, dividing coastlines
25 cm plastic modules, steel studs are interested into channels in the modules and connected and mounting is completed with plastic nuts in fixing profile channels. Using the channels located in four corners of fixing, fence could have 360 degrees of direction. The implementation enables the fence to be turned in four directions. Plastic fences are attached using galvanized aluminium fixing profile, steel, and smart nuts. Aluminium fixings are mounting to hard surface using aluminium cast bases. 10 cm galvanized steel dowels are used when the aluminium cast base is mounted on the surface. Triphone steel dowel bolts used in mounting the aluminium cast base to the hard surface are covered with plastic covers.
1-MODULE 3A: Plastic head module. Fences produced as 25 cm bodies with injection method using high density, polyethylene (PE) with addition of flame retarding and colourfastness chemicals. These fences are passed through steel stud channels to achieve 1 meter or desired spacing. Thickness 16.1 mm, width 1000 mm, height 484 mm and weight 2780 gr.
2- MODULE 8-9: Steel Mounting Stud Bodies are used when the bodies are brought together, brings robustness to middle closing. Produced from M 12 worm gear steel, galvanized, height 1040 mm and weight 720 gr
3- MODULE 4: Plastic Head Cap, plastic modules are inserted between stud nuts and module. It prevents the stretching of plastic module and presents an aesthetic look. 20mm*10mm elliptic shape, hole in the middle for M12 screw and weight 3 gr.
4- MODULE 3 – Plastic middle cap is used for combining plastic modules, prevents stretching of steel studs and bring robustness. 20mm*15mm elliptic shape, hole in the middle for M12 screw and weight 5 gr.
5- MODULE 10 – Plastic stud nut is mounted to each end of steel studs enabling mounting the assembled fence to be mounted on fixing profile. Diameter 24 mm, width 24mm and has a hole for M12 screw.
6- MODULE 6 – Fixing profile is manufactured from aluminium and painted with static powder paint in the oven. Diameter 49.8mm, length 550 mm and weight 671 gr/mt.
7- MODULE 5 – Aluminium cast base is manufactured from aluminium and painted with static powder paint in oven. Since it has holes on it, the fence is fixed to the ground with appropriate spacing. Base width 103.6*103.6 mm, height 55 mm and weight 335gr, 4 outer nut hole and 4 inner nut hole.
8- MODULE 11 – Fixing Cap is manufactured from high density, polyethylene (PE) raw material with addition of flame retarding and colourfastness chemicals. Cap closes the top parts of the fixing and prevents the channel caps from falling. Diameter 62mm, height 60mm and weight 25gr.
9- MODULE 7 – Fixing channel cap helps to aesthetically close the unused channels on fixings. Width 23.3 mm, length 7.7mm and height 530 mm. Weight 66 gr/m.
10-MODULE13 – Super plastic imported dowel is manufactured from M8*65 plastic. It is used for mounting the cast base to the surface.
11- MODULE 12 – 5*8 steel screw. M8*75 head, steel manufactured galvanızed screw. It is used for mounting the cast base to the surface. 12- MODULE 14 – Countersunk steel screw; YSB type screw. It is used for mounting plastic fixing head to aluminium fixing profile.